Affise (Affiliate Software)

S2S tracking is most recommended for the accurate tracking between Affise and Scaleo.

Set up

1
Scaleo: Start adding the offer as usual.
2
Affise: Just add &ref_id={click_id} at the end of the Landing Page URL (Affise tracking URL).
3

NEW Tracking URL Example: http://rocketcompany.g2afse.com/click?pid=5210&offer_id=132005&ref_id={click_id}

4
Scaleo: after adding the offer, go to the T racking > Manage and click on the "Global Postback" and copy the Postback Pixel:
https://demo-track.scaleo.io/track/goal-by-click-id?click_id={REQUIRED}
5
Affise: go to the Offer, find " Your postbacks" block and insert Scaleo pixel URL.  
Note: replace  {REQUIRED} with {ref_id}.
6
The final URL will look like this:
https://demo-track.scaleo.io/track/goal-by-click-id?click_id= {ref_id}

Testing

  • When conversion is recorded at Affise, you will be able to see Scaleo Click ID code at the reports. Click ID should consist of 32 alpha-numeric characters. If it is not, please check #1 Offer Set Up section above.
  • If everything is OK, you will get a conversion in Scaleo. You can check the transaction’s status and the Click ID value at the Statistics > Conversions.
  • Click ID value will be the same in Affise and Scaleo. If it is not, please check #1 Offer Set Up section above.
  • If you got a conversion in Affise, but still can’t get it in Scaleo, please, check the pixel’s placement in Affise.
Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us